Lab 9: Network Socket Programming (Intermediate)

Lab

Overview

In this lab, you will use the Python programming language to implement a simplified DNS client that can send requests for basic IPv4 and IPv6 addresses.

DNS (the Domain Name System) is a hierarchical, distributed database that stores information associated with domain names, e.g. myhost.com. The most common piece of information is the IPv4 or IPv6 address(es) associated with that domain name. However, DNS can also store a wide variety of other domain-related information, such as the associated domain mail servers, name servers, domain name aliases, reverse DNS lookups (obtaining a DNS name from an IP address), anti-spam records such as Sender Policy Framework, and many other record types.

Lab - Getting Started

To begin this lab, start by obtaining the necessary boilerplate code.  Enter the class repository:

unix>  cd ~/bitbucket/2016_fall_ecpe170_boilerplate/

Pull the latest version of the repository, and update your local copy of it:

unix>  hg pull
unix>  hg update

Copy the files you want from the class repository to your private repository:

unix>  cp ~/bitbucket/2016_fall_ecpe170_boilerplate/lab09/* ~/bitbucket/2016_fall_ecpe170/lab09/

Enter your private repository now, specifically the lab09 folder:

unix>  cd ~/bitbucket/2016_fall_ecpe170/lab09

Add these files to version control in your private repository:

unix>  hg add dns.py dns_tools.py

Commit the new files in your personal repository, so you can easily go back to the original starter code if necessary

unix>  hg commit -m "Starting Lab 9 with boilerplate code"

Push the new commit to the bitbucket.org website

unix>  hg push

Lab Part 1 - Wireshark Tracing

Wireshark is a powerful network packet capture and analysis tool.  You are going to use Wireshark to capture network packets, filter to select only DNS packets, and then inspect them.

Install Wireshark:

unix> sudo apt-get install wireshark

Configure Wireshark so non-root users can capture packets (by adding to Wireshark group):

unix> sudo dpkg-reconfigure wireshark-common
unix> sudo usermod -a -G wireshark <YOUR-LINUX-USERNAME> 

Logout (or restart Linux) for this change to take effect.

Run Wireshark:

unix> wireshark &

(If no interfaces are visible after running Wireshark, re-run it with root privileges via 'sudo')

In the Wireshark GUI, select the 'eth0' interface and click 'Start' to begin packet capture. 

Back at the command line, use the dig utility to send a DNS query to  Google's public DNS service at 8.8.8.8 for the IPv4 address of www.pacific.edu, and the IPv6 address of www.google.com.  32-bit IPv4 addresses are referred to as "A records", and 128-bit IPv6 addresses are referred to as "AAAA records".  Note that the +noedns option is used to get dig to operate in a legacy mode that produces identical output to our Python client in Part 2 of the lab.

unix>  dig www.pacific.edu A @8.8.8.8 +noedns
#   Should produce the following IPv4 result:
#   ;; ANSWER SECTION:
#   www.pacific.edu. 59 IN A 138.9.110.12

unix>  dig www.google.com AAAA @8.8.8.8 +noedns
#   Should produce the following IPv6 result:  
#   ;; ANSWER SECTION:
#   www.google.com. 299 IN AAAA 2607:f8b0:4005:802::1013 

After running the dig commands, go back to Wireshark and press the RED square button to stop packet capture.

Did any packets appear in Wireshark?  If not, you must be capturing from the wrong interface. Pick something other than 'eth0' (the default choice) and try again.

Assuming you captured some packets, locate the filter panel in Wireshark. Enter 'dns' in the field and press <enter> to filter the packets so that only DNS messages (requests/replies are shown). 

Mark (by right-clicking on a packet and choosing the desired option) only the query (request) and query response (reply) packets that correspond to the DNS lookup for www.pacific.edu and www.google.com that were done above.  Depending on how long you captured packets for, and how busy your computer system was, you may have also captured DNS requests/replies for other hosts, but we are not interested in those.

Submission:
(1) Using the File->Export Specified Packets option, save only the marked packets to a file called dns.pcapng.  The file format should be PCAPNG, which is Wireshark's native format.  Submit this file with your lab.

Note: Wireshark does a very good job of decoding the DNS packet and showing the contents of each field.  By clicking on a decoded lined item, you can see the corresponding raw byte values in the panel at bottom.  You should refer back to this Wireshark export file for comparison purposes during Part 2 of the lab, where you are writing your own DNS client instead of using the pre-written dig program.

Lab Part 2 - DNS Query Client

Write a Python3 program called dns.py to send DNS queries to a server and parse the replies.  Note that there is substantial boilerplate code provided that already parses DNS replies, so you need to focus on simply sending a correctly-formatted DNS query.

Program requirements:

1. Your program must send DNS queries over UDP to a DNS server using the Python3 programming language and the socket module.
1. Warning: Python has a built-in implementation of getaddrinfo() which will do a basic DNS lookup if all you need is an IP address.  Also, a variety of external tools also exist for more sophisticated DNS lookups, such as DNSPython, DNSimple, and dnslib.  Unfortunately, you *cannot* use these libraries (or anything similar) for this lab, and zero points will be awarded if you do! The reason for not using these libraries is because they hide how the DNS protocol works, and the purpose of this lab is to actually learn about the protocol operation. Instead, you must use the lower-level socket module.
2. Your program must send requests for either IPv4 ("A) or IPv6 ("AAAA") addresses
3. Your program must take 3 command-line arguments: 
1. The type of of address requested (denoted with the --type flag), which can have the value 'A' or 'AAAA'
2. The host name being queried (denoted with the --name flag)
3. The IP address of the DNS server to query (denoted with the --server flag)
4. Your DNS queries should follow the proper endianness standard for a network protocol. (With incorrect endianness, you will not get a valid reply from the server)

Example program invocations and output querying against Google's public DNS service at 8.8.8.8:

unix>  ./dns.py --type=A --name=www.pacific.edu --server=8.8.8.8
Sending request for www.pacific.edu, type A, to server 8.8.8.8, port 53
Server Response
---------------
Message ID: 49821
Response code: No error
Counts: Query 1, Answer 1, Authority 0, Additional 0
Question 1:
Name: www.pacific.edu
Type: A
Class: IN
Answer 1:
Name: 0xc00c
Type: A, Class: IN, TTL: 59
RDLength: 4 bytes
Addr: 138.9.110.12 (IPv4)


unix>  ./dns.py --type=AAAA --name=www.google.com --server=8.8.8.8
Sending request for www.google.com, type AAAA, to server 8.8.8.8, port 53
Server Response
---------------
Message ID: 64164
Response code: No error
Counts: Query 1, Answer 1, Authority 0, Additional 0
Question 1:
Name: www.google.com
Type: AAAA
Class: IN
Answer 1:
Name: 0xc00c
Type: AAAA, Class: IN, TTL: 299
RDLength: 16 bytes
Addr: 2607:f8b0:4005:802::1012 (IPv6) 

1. www.pacific.edu (IPv4 and IPv6)
2. www.google.com (IPv4 and IPv6)
3. cs.stanford.edu (IPv4)
4. bogus.stanford.edu (IPv4)